yealink_w52p-1yealink_w52p-2

1. Installing your phone.

Connect your phone's power adapter cable to charger cradle.


yealink_w52h-2


2. Insert the batteries into the handset.


yealink_w52h-3


3. Charge the handset.


yealink_w52h-4


4. Connect network and power for the base station.


5. Launch a web browser on a computer that can reach the VoIP-phone on the network. 


6. Direct the browser to the IP address of the VoIP-phone.


Note


To determine the IP address:

Press OK button on the phone, then select System status | Network.


7. If DHCP is disabled in your network, you can enter static IP manually:


Press OK | System Settings Network (default PIN: 0000).


Also you can request for network settings to your system administrator.


8. Enter the IP address in your web browser address bar. There will be opened the phone configuration page. 

Enter login and password (default is admin).  



9. Click the Account tab in top menu.



Register Name: Enter your SIP ID from registration mail

Username: Enter your SIP ID from registration mail

Password: Password from registration mail

Transport: UDP

Server Host: Enter SIP proxy domain address 

Server Expires: 120


Click button Confirm at the bottom to save your settings.


10. Click Codec in left menu.


Please set turned on only codecs PCMA (G711a) and G729.



Click button Confirm at the bottom to save your settings.


Your VoIP-phone is ready to use!